My two window lifters on the right side do not go. They don't let the switches run down from the driver's door, nor can they run from the switches on the doors themselves. I was the first to look for the security, and according to the plan of the security, only one described security should be for the 2 rear windows. Which is also full in order, For the front two window lifters is no security listed in the occupancy plan??? But the rear left window is going up and down. Next, I removed the switch at the front right to see if the current is coming, the switch is five-pin and only one (the one in the middle) comes in. And I don't know any more!?
Hope someone can give me one or two tips on how to proceed.
Hallo Bei mir wars ähnlich. Da ging nur noch der vordere linke Heber. Irgendwann bin ich drauf gekommen, das die Dinger nicht nur Strom sondern auch Masse brauchen. Du findest im Stecker ein weiss/blaues Kabel...prüfe ob da Masse anliegt. Alternativ lege ein extra Massekabel auf diesen Pol ... dann sollten ALLE wieder gehen! Gruss Dieter
meiner Meinung nach nur einmal . bin mir da fast sicher. Schau doch mal in den Stromlaufplan ...wenn du den nicht hast, frag mal MatthiasOL unseren "Kabelwurm"
