Flasher without function

5 posts · 3,211 views · started

#1
Original: German · machine translated
Good afternoon to the highly esteemed audience,

This morning, I was caught again with a case with which I would like to show some effort in solving it.

The following vehicle is affected:
Audi A8 4.2 Quattro Bj. 2000 (i.e. a facelifter) with factory folding trailer coupling (but I have never used it myself),

The case:
This morning, turning to ca. Three to four times blinking suddenly turned on the indicator lamp for trailer operation in AI (a small indicator symbol with a "1" in the middle, green, in the left part of the tachometer) and the turn signal has simply adjusted the operation when the steering stick lever is placed. At some point the lamp went out again, after one, twice blinking then again the same phenomenon. Pendant light on -> turn signal no function, light off -> turn signal goes.

At the moment the lamp is always on, so it can't blink anymore - is a bit annoying in traffic, especially because I can't stand people who don't blink

I then thought that somewhere in the trailer plug or on the way there could be a short circuit and pulled the fuse 2B in the trunk (marked as "trailer"). But this has not brought about any change.

Funny enough, the warning flasher works without any problems. When I turn this on, the trailer control light disappears instantly and even stays out of it sometimes. But as soon as I use the normal turn signal (no matter left or right), there is a layer in the shaft.

The error memory is (unfortunately) empty, so that I am standing in the reeds. Has anyone ever seen this before? Or do you have any idea where I could start looking?

Thank you very much for your help,
Michi
WhatsApp
#2
Hier noch kurz ein Feedback, falls es mal jemand anderes erwischt:

Warnblinkschalter ersetzt und gut ist. In diesem Schalter sitzen zwei Relais, das eine ist für den Warnblinker zuständig, das andere für den "normalen" Blinker. Das letztere war wohl nicht mehr funktional. Scheint durch alle Audi-Baureihen der damaligen Jahre hindurch ein bekanntes Problem zu sein.

Gruss,
Michi
WhatsApp
#4
Hallo Lukas,

nein, im 4D0941509D sind zwei Relais drin, habe den alten Schalter gestern mal aufgemacht. Wenn man den Schalter von vorne betrachtet, sitzt links das Relais für den Warnblinker (hat unten an der Metallzunge zwei Kontaktpunkte) und rechts das andere mit nur einem Kontaktpunkt. Dieses habe ich dann versuchsweise ausgelötet, so gut wie's geht die Kontakte gereinigt und mit Kontaktspray behandelt und alles wieder zusammengesetzt. Jetzt funkioniert es auch mit dem alten Schalter wieder.

Allerdings frage ich mich jetzt, für was dieses Ding wohl sein mag, wenn es dann noch ein Blinkerrelais extra gibt...?

Gruss,
Michi
WhatsApp
#5
Für das Aufblinken beim Ab- und Abschliessen.Habe ich mir mal sagen lassen.
Das "eigentliche" Blnkerrelais sitzt eben unterm Lenkrad.Beim VFL war das Warnblinkrelais nicht in den Schalter integriert, sondern saß im Relaisträger unter dem Teppich im Beifahrerfussraum.
Beim VFL gab es die Quittierfunktion der Blinker nicht, da kam nur ein Hupton,wenn man die Karre abschloss.
WhatsApp

Join the conversation, see photos and ask questions? Sign in with your forum account.

Sign in