Audi A8 D3 4E Komfortsitze (2006) in A8 D2 (2002)

Dimitri · 2016-10-21T18:15:36+02:00

Hallo liebe Leute, brauche Hilfe von Elektriker bezüglich Ansteuerung von Komfortsitzen aus A8 D3, die ich in meine D2 einbauen will. habe ERVIN-Schaltpläne runtergeladen als Grundversion, leider dort sind keine Sonderfunktionen von Komfortsitzen wie Massage und Belüftung vorhanden. Auch gibt es nich Schaltplan von Sitzsteuergerät J136, was unter d. Sitz steckt und die Spannungen an div. Antriebe schickt. Meine Frage: wird ausreichend nur Stromversorgung an Sitzsteuergerät J136 anzuschließen (+ …

Hello, dear people,
need help from electricians regarding the control of comfort seats from A8 D3 that I want to install in my D2.
have downloaded ERVIN schematics as a basic version, unfortunately there are no special functions of comfort seats such as massage and ventilation. There is also no schematic of seat control unit J136, which under d. Seat is stuck and the tensions on div. Drives sent.
My question: will only be sufficient to connect power to seat control unit J136 (+ to D11, C11 and – to C12/31, D12/31) to the basic functions such as seat height, inclination, backrest, etc. to reach? All control buttons of these drives are located in the seat and go directly to J136.
In order to get a better overview of J136, everything from control unit to one sheet was summarized and enclosed here.
Presumably, without changes to the J136, it will not be possible to control all functions, as three CAN lines go there.
Was sagt ihr dazu?