moin moin!the problem:
you set a departure time and find the timer of the standh. so that you find a nice warmed up dare. but everyone knows the situation, everything is delayed and you come to the car, the heating is already off and the car is cold again!
the solution:
I browsed here at our forum and found a hint on a link, GSM switch. (thanks to wd.jahn...!)
So I got in touch with the company right away and that came out.
it is a circuit in the 2 relays built in sin which can be controlled by a mobile phone. using the sounds that each number creates.
what impressed me the most was the fact that you simply plug in, in this case 6150, switch it to automatic call acceptance and then only have to supply the "box" with 12V.
you have the possibility to control 2 different functions. I first got into this "flying build" with the standh. ==References==
if you are the switch module of the standh. Rough, come on a string cable to show up. among others a red, a black and a brown cable.
the red is the 12V supply and is simultaneously moved to the foot contact. the brown cable is the mass for the box and the black is the control line of the standing heater.
in picture 2 you can see how I turned on the lines and the cables I led out through the hole on the left side of the housing of the standing heater (picture 3)
the cable which hangs down in picture 3 is the mobile connection cable.
on the sequence:
I turn on the hany and leave the car. If I want to start the heating now, I choose the tel number of the phone, can of course be a prepaid card!!!!, that phone goes after the 3rd ring, then you press the "2" and the standh. is activated. a brilliant side effect is still this, by switching the box between the timer function is sown out of power!
the primem of switching off again I have solved with the help of the tabster (picture 6). in the first trial study, you had to deactivate the circuit by radio.
the taper has the same function as the "flame" of the standing heater. it brings the relay back to fall and the control voltage is deactivated.
I've first installed the gaze loosely to photos and the div. I'm not going to be able to do any tests.
now the question remains open, where do I get the stream for the phone from!?!
I took switched 12V from the window lift and connected a 12V mobile charger. the phone is charged by pressing the ignition and the battery is not constantly loaded when the car is standing!
the box as such has such a low current consumption (15mA) that it does not fall into weight and can always be under current.
I had made the first attempts even without mobile care. because you know when you want to use the circuit and the battery ca. 1 week, you can save yourself the wall with a mobile load and all 2 weeks it just reload.
so far so good, now to the other possibilities:
==References====External links== as an immobiliser. you can do without problems e.g. interrupt the fuel pump or other important "organs". what I find very good about this kind of "egression protection" is the fact that none of the existence and place of the circuit knows and thus it is difficult to find the circuit!
as an additional ingenious effect is the use of an o2 card. on the o2 internet side you can get your mobile position - so his car !!! - determine the point.
horny or?? and all for 129 euro!!!!!!
here the link of the gsm switch:
http://www.top-neuheiten.de/cam/gsmswitch.htm
I'm really excited about this circuit and the winter will come back again...!!!
if you have asked, please contact:
Cristoph Martin
Tel.: 06306-99 10 06
cam@online.de
I am of course also available for further questions. my number is:
0171-8315253
I have nothing to do with the sale. I'm just as crazy as you who likes to make and who loves his car!!!
ciao jörg
