I have been active as a reader of this forum for a long time, but now it's time for the first post
I am at the end of my Latin^^
My fat guy is extremely thirsty...
25-30l are the average and when you start to go sporty also go loose 40l
is somehow suboptimal in duration
After using the search function
)I stepped on the Lambda probe and I used to fight against the plug and measure...
In parallel, 0.3V and max. Variation are allowed +-0.05V with the short "turn up",
no more...
The signal with the disconnected plug seems to be relatively normal...
Probe brings about 0.02V before reaching its working temperature
then jumps to 1.2V and the voltage goes down leisurely (about 1min) to 0.3V and remains quite constant
Should be 450+-50mV according to the guide...
It's almost...
My guess is now slowly moving towards the control loop...
The control unit gets a signal from the Lambda probe, but doesn't do anything with it...
Curiosities about the thing is actually the 0.3V for a rather lean mixture stand...ergo...less consumption, higher temperature
But the opposite is the case with consumption!
Hoses look good
Candles are usually
It's okay, actually.
He's a bit white, but not too...
Unfortunately, I can't judge the performance, because I was not allowed to make a comparison,
but in my opinion more should actually go (but is very subjective)
Audi V8 4.2l Bj 93
And now it's...
Who knows?
