Audi Cabrio MJ 97; electric roof

6 posts · 5,613 views · started

#1
Original: German · machine translated
Hello, everybody.

Since I have not been able to register in the Audi Convertible Forum for any reason, I try my luck here.

The electric cover of my Audi Cabrios, model year 1997 does not want to open for 2 weeks.
(at the last closing a few days before it worked still without problems

The following procedure:

Pull the hand brake – open the lock – lower the windows.
By pressing the switch to open the top, absolutely nothing happens.

In the forum <a href="http://www.audicabrio.info" target="_blank">www.audicabrio.info</a> I searched for helpful entries. Often, damaged harnesses are pointed out. There is a repair kit from VOBA.

With my licensed software VCDS (formerly VAG-Com) I first read out the error memory:

A sporadic mistake was made.

Addresse 26: Electric. Dachbet. Control unit part number: 8G0 959 255 A
Component and/or version: automdeck
Coding:
Holding number:
1 error found:

00271 - see repair group 01
35-10 - - - Sporadic


2 years ago, I bought the Audi repair manual for electrics at the large online department store.

With this and various instructions from the above forum, I tried to understand the measurement blocks.

In the closed state, the values are shown in Figure 1.
The values in Figure 2 are available with the top unlocked and raised in front.

In the many experiments I noticed the following:

Even without the hand brake – the indicator lamp in the AI shows the hand brake correctly, so I think that the switch for the hand brake is in order. - I can lift the top up front. Normally, a magnet should provide for the locking if the hand brake is not tightened – so it has worked so far.

From the Rep guide:
The microswitch –F172 and the magnet for cover lock –N187 are located in the roof frame on the left and can only be replaced with the left lock part.

Unfortunately, I do not have the required circuit diagrams to check the switches for function.

Is it possible that this is my problem? The switch F172 reports "locked" and the opening procedure is not set in motion.

I hope you can help me. Thank you for your answers.

Greetings

Rainer

Edited by Rainer

WhatsApp
#3
Hallo Rainer,

als Fehlerquelle für ein nicht funktionierendes Verdeck kommen mehrere Fehlerquellen in Frage.

Wenn mir mal mechanische oder hydraulische Probleme ausblenden, ist der Kabelbaum links und/oder rechts in der Kofferraumklappe wirklich der häufigst vorkommende Fehler. Es könnte aber auch einer der Mikroschalter sein, welcher z.B. die Stellung der Kofferraumklappe oder auch des Verdeckkasten meldet.

Mit Deinen Fehlermeldungen kann ich leider nichts anfangen - dafür bin ich technisch leider zu wenig bewandert!

Warum klappt Deine Anmeldung im Cabrio-Forum nicht? Berichte ...

Edited by Kai

WhatsApp
#4
Rainer,

schick mir per PN Deine E-Mail und welche SLP Du brauchst, nehme an E-Verdeck, dann lasse ich Dir diesen zukommen.
WhatsApp
#5
Hallo
Also bei meinem 93èr Cabrio war es bei dem gleichen Problem der Steller fürs Heckklappenschloss. In der grossen schwarzen Box ist eine Platine in die feuchtigkeit eindringen kann. Dadurch kann das Steuergerät nicht erkennen ob der Kofferdeckel zu ist oder nicht, da es eine Kollision zwischen dem Verdeckkastendeckel und dem Kofferraumdeckel verhindern möchte. Hatte damals auch keinen Fehlereintrag.
Mfg Sven Kurmann
WhatsApp
#6
Hallo Sven,

Danke für den Tip. Bei mir war eine Ader (gelb/weiss) im rechten Kabelbaum Kofferraumdeckel gebrochen. Kommt nicht selten vor. Die Auswirkung dürfte aber die gleiche sein, wie von dir beschrieben: Steuergerät erhält kein Signal, dass der Kofferraumdeckel geschlossen ist.
Ich habe einen Reparaturkabelbaum von FOBO eingebaut. War keine grosse Sache. Jetzt funktioniert die el. Betätigung wieder.

Gruss
Rainer
WhatsApp

Join the conversation, see photos and ask questions? Sign in with your forum account.

Sign in