V8 does not start after expansion of the WFS.

HI!!!!

I have a small problem with a V8 bj.93.
Someone tried to expand the immobilizer, using the conlog key.
I've already looked at the FAQ here, but there's a slightly different one described.This one has only J1 and J2.
So now she was torn out unintentionally and I'm supposed to make the car run again.
But I have some problems with the cables.
Here are some pictures:

web page

The white cable with the white plug plug was on the free connection that can be seen above.Is that part of it?The connection belongs to the one fuel pump relay, which sits on the plate right in the footroom.

web page

Here I have two more cables.Once brown/green, once brown/blue.
The Br/Bl comes from the fuel pump relay (as far as I could see) and has +12V on ignition.
The Br/Gr has a plug connection (black plug) which then continues two cables of this colour.Also +12V on ignition again.(see next picture)
I don't know where to put it!

web page

Hier noch was:
The red plug leads a cable with a sticker 23.Was unprofessionally connected with a fuse which also leads a white cable with sticker 23.On these cables is NO currentWhere to go these cables I can not say.

Maybe someone can tell me where the cables all have to go, or if something was missed.Of course, the car does not start.Have also the feeling that the petrol pump is not running.

Really to cry when you have to iron out the crap from others......