I hope to be ready for the road soon...

19 posts · 5,306 views · started

#1
Original: German · machine translated
So now after the winter I can devote myself to my V8. Was in October once at the MFK (TüV) and there was unfortunately a lot of complaints...I did not want to do things before the winter, then drove over winter with the other cars

Here's the list of defects:
-Cuff at the front left side of the swing arm defective
-Front handlebar rubbers front
-brake hoses cracked
-Disks in the rear have rust (brake effect ok)
- Handbrake winding too weak

and now also the exhaust gas test is due

At the moment, the lateral handlebars are replaced by rubbers and the cuffs are replaced, as are the rear brakes (dishes, blocks) and today I wanted to get on the brake hoses, but there were problems, at the back I could easily replace them, at the front of the driver side, however, the small metal hose that leads to the brake cylinder must be replaced. I'll have to organize something tomorrow.

Well, then I'd have to check the handbrake, maybe adjust it or change ropes, look and do the exhaust test. And then I'm actually ready. Only the problem is that I have to check the car again from the front, because I triggered the vehicle before the winter due to the defects then...pronounce it could come back to new things...
WhatsApp
#3
So hab mich heute Morgen mal an die Arbeit gemacht, inzwischen ist der Abgastest gemacht und der kleine Metalschlauch ersetzt. Allerdings will die Handbremse nach wie vor nicht so wirklich...die Ursache ist allerdings weniger schlimm als ich anfangs gedacht habe: Die Zange hinten verrichtet ihren Dienst einwandfrei, aber das Handbremsseil will nicht in die ursprüngliche Position zurück, nachdem die Handbremse gezogen wurde...jetzt muss ich halt mal warten bis halb 2, dann kommen meine Seile und dann sehen wir weiter. Ich hoffe, dass es dann funktioniert.
WhatsApp
#4
So jetzt ist er fertig. Handbremsseile sind pünktlich angeliefert worden und auch schon eingebaut, das Ganze eingestellt und jetzt auch mit dem nötigen Zug versehen sollte eigentlich jetzt alles io sein. Mal schauen wenn ich ein Termin habe, was der "Experte" meint...
WhatsApp
#5
Genau heute in einer Woche ist der Termin, ich hoff mal das Beste...
WhatsApp
#8
So ich war gestern beim Vorführen auf dem Strassenverkehrsamt, doch leider Gottes hat es wieder nicht ganz geklappt...der Handbremshebelweg ist noch etwas zu lang (das störte den Experten weniger) aber er hatte leichten Getriebeölverlust, was den Experten störte und nun muss ich die Sachen beheben und zur Nachkontrolle. Handbremse einstellen ist ein Kinderspiel, das mit dem Getriebeöl weniger, muss dann noch gucken, was ich genau machen MÜSSTE aber für die Nachkontrolle morgen reicht mir ein runterwaschen mit dem Hochdruckreiniger...
WhatsApp
#9
ich hab das zwar schon mla gefragt... nicht hier aber egal.... wie und wo kann man die einstellen?? Die Handbremsseile meine ich?
WhatsApp
#10
Auto auf den Lift nehmen, und dann siehst du am Unterboden auf Höhe der Handbremse eine Blechabdeckung, diese schraubst du weg und dann kannst du die Handbremse dort einstellen, brauchst halt noch das nötige Werkzeug dazu, sicher mal eine Verlängerung und ein Gelenkstück (ich hoffe ich habe das richtig ausgedeutscht )
WhatsApp
#11
ok und du hattest den auspuff runter oder wie??

ich habmal als antwort bekommen die steltl sich selbst nach??

lg
WhatsApp
#12
Nene den Auspuff kannst du dran lassen. Ist genau beim Verbindungsstück zwischen Mittel- und Endschalldämpfer glaub ich. Stellt sich selber nach? Ne kann nicht sein, sonst wär ja die Wirkung nicht so miserabel gewesen, aber jetzt seit sie eingestellt ist, funktionierts perfekt.
Auto ist übrigens durch gekommen
WhatsApp
#13
Gratuliere! Am Montag muss auch wieder einer in der Schweiz zur Prüfung...
WhatsApp

Join the conversation, see photos and ask questions? Sign in with your forum account.

Sign in