Pin-Belegung abnehmbare orig. AHK

Wolfgang · 2008-04-17T07:56:22+02:00

hi, ich muss euch nochmal kurz mit meiner AHK nerven. Ich habe zu diesem Thema zwar schon die Suchfunktion gefüttert, aber leider nichts passendes dazu finden können, daher hier, wie gesagt meine Frage: Die beiden Stecker am Lampenkontrollgerät sind soweit klar, die Belegung der 7poligen Anhängedose ist mir soweit auch klar, doch was ist mit den beiden weissen Steckern, zu denen einmal das linke und einmal das rechte Blinkerkabel geschleift ist?? Das Signal wird ja an den beiden kleinen weissen …

hi,

I'm gonna have to bother you guys with my AHK for a second. I have already fed the search function on this subject, but unfortunately I can find nothing suitable for it, so here, as I said, my question:

The two plugs on the lamp control unit are so clear, the 7-pin towing box is clear to me, but what about the two white plugs, to which the left and once the right turn signal cable is looped?? The signal is ground through on the two small white plugs, which is 2 pins, but only one pin has been occupied, meaning that a single pin goes out again, which fits exactly to the lamp carrier of the rear lights, where exactly one pin is free. Does the pin belong in there?

AND then there is a black, round 3pin plug, also near the left rear light. What about this one? Cable colors were yellow, red/blue and brown I mean. However, are quite thick cables, I mean 1.0mm2 or even 1.5mm2 in cross section. Is that possible? for a fog lamp? But I didn't have a matching counter plug for this...

Thank you for your help,

Wolfgang Schuster