I'm not here too often. But when there's a real problem that's annoying
Okay, let's get back to history.
Was with the friendly gentlemen of Audi to bring my TOEF TOEF through the TÜV. AU worked. When I wanted to pick up the car in the evening, the engine didn't start.
To the clarification - nothing came. Apparently, the engine control unit locked something to keep the engine running.
I'm baffled, then Audi baffled, then I'm stunned because Audi is baffled.
So car rental Hausi moves (was Friday evening) to give Audi time from Mondays to breathe my car back into life. Saturday morning of the call:
Engine's running!
In the workshop arrived the explanation of the specialist: I don't know!
Unrepeatfulness repeated from the day before
All right, from then on, everything was going to be like that again. Days later he did not jump again. In the evening after about 4 hours of service life.
Then it went on for a while until last night
Well, I'm starting to get the following suspicion:
The Lords of the Eye Rings have missed my Töffi AU and corresponding changes respectively. Settings made. Is it possible that my propellant does not start in a certain temperature window because switched off components such as ignition or injection do not allow it?
It is striking that if the engine is really cold, so it was standing overnight or is really warm through the area opening e.g. ==References== But if my juices were about 3 - 4 hours he apparently has a temperature that tells the control unit that according to the oil temperature the engine has 130°C and the cooling water is - 87°C and this doesn't mean that at all.
Maybe I could save myself the bullshit I wrote, but also because just n`s shit Wackler is somewhere in the sacred areas of electronics.
I cannot judge how much my observation stands on solid foundations, but truth is in the high range.
I present this story in both forums V8 and Motor to reach as many as possible. It's annoying and girlfriend is already threatening to buy BMW, so please help with advice if you can and if the ideas are still so crazy, the problem is it too
Marcello
Thanks to everyone who gave me the tip or advice with the OT encoder and the speed sensor.
Marcello
