Resistance values Temperature sensor G82 Temp display

Hello, V8 friends.
I suspect that my water temperature indicator in the instrument cluster gets false values from the G82 encoder on the left cylinder head.
In the repair guide I found no values for this, only from the G62 dealer on the right cylinder head, back, for the Motronic etc. is.
Recently, a diagram of the G62 donor had been set here, but I am looking for the values for the G82.

Can anyone help me out?

Here I measured the following values today at noon with my V8: At 59 degrees at the water connection beside the donor G82 ( indicator combi were 70 degrees) the donor G82 205Ohm, at 62 degrees ( combi approx.73 degrees )189Ohm, at 68 degrees ( combi 75 degrees ) 185Ohm, at 75 degrees ( combi 77 degrees ) 183Ohm, at 93 degrees ( combi 83degree )159Ohm.

Can someone please help me, as I do not have a table etc. I don't plan to spend 60 euros on good luck either.

Greetings Manfred.