Part Number

Hi Leo,
the part number for the support is:443 511 329 B
But you can get the rubber mounts alone. They are mutch cheaper than the whole support an very easy to fit in.
I think you want to change the support because of ugly "klock" noise at surface unevenesses. I changed the mounts on my car and it was very simple to do.
The part number for the rubber mounts is: 443 511 247 D
you need 2 parts per side (4 parts for both sides)

Thanks Tim
It's the one I was looking at ETKA but it seems so different that made me doubt.
Thanks again

Leo

Hi Leo,
the part changes in 1992 (I guess). For correct definition, the body identification of your car is needed.
Support 443 511 329 B is for body identification numbers >>44-L-125000
Support 4A0 511 329 A(lh) (and 330 A rh) is for numbers F44-L-125001>>
In this case even the rubber mounts have different part numbers.

Thanks Tim
I guess I now have to bother you again by asking two things:
1) How do I get the body ID number of my car ?
2) In the ETKA # V8 - 90 - 5 - 05 - illustration 45-00 update 525,
part # 11, number 4DO 511 523 C
I cannot seem to find anywhere
Is that the mount "rear subframe" ?
I'll appreciate the soonest reply 'cause it really urges me
Thanks in advance
Leo

I forgot !!!
How about the part number 443 511 341 F or A ?????
How do I know?

Hi Leo,
you don´t bother me
Your (car´s) body identification number should be on a plackard under the bonnet, I think over the headlights near the bonnet lock. The number starts with: WAUZZZ followed by a couple of letters and numbers. May be, that the german word "Fahrgestellnummer" is written at the beginning of the number. I don´t know about that by exported cars.
I haven´t got ETKA, I have got ETOS an they are different. Please send an attachment with the picture an the number you mean.

Hi Leo again,
the washers for the mount you asked for are ....341F depending on your identification number (I´m so sorry!). The 341A´s are for the wheel bearing housing

Here it goes.
I hope you can see it well
(Cannot save page from ETKA to make it clearer so I took a pic of it
Next I'll send you the part # pages
Regards
Leo

here's the first page with part numbers .................

Here is the second page

Hi Leo,
a little late, I´m sorry! If your car was built before 1st of August 1992, you need:
picture no. 5 = 443 505 145 A
picture no .11 = 4D0 511 523 C
picture no. 23a = 443 511 341 F
picture no. 23ab = 443 511 341 G

These are the correct part numbers.

No problem Tim and thx again.
My car was definitely built before that date.
Now here is the problem: 443 505 145 A - I have it already
but this 3 others, I cannot find
picture no .11 = 4D0 511 523 C
picture no. 23a = 443 511 341 F
picture no. 23ab = 443 511 341 G
Any suggestions ?
Thx
Leo

Another quick question (sorry)
Is the part # 4D0 511 523 C
what is called the mountings for the rear sub-frame
?????
'cause dealer is asking me a fortune but I cannot find it anywhere else under that part number.
Any money saving suggestions ?????
Appreciated

Hi Leo,
I have sent you an email. 4D0 511 523C is a mount for the rear subframe for all models.