I Replaced all the burnt out bulbs, removed 1 rear wheel cannot believe my guess was correct Borbet Wheel has an approx 73mm bore Audi hub pilot 57.1mm and no the is not any Centering Ring Adapter

I have ordered the Aluminum Centering Rings next will be ECS long stud conversion kit so I can install 20mm spacers and discard those horrible Audi wheel bolts

The Bay Area of Ca climate has been very good to this car in many ways, all the rear suspension bushings are in good condition, CV's are good, I found 1 broken ABS harness on LH front also the CV boot on that side is missing the securing Band Clamp.

Checked around the engine, I can see the timing covers have been removed recently confirming it should have new timing belt, however I will have to inspect it myself for piece of mind.
New air filter and top radiator hose, the distributor caps look like they been on there a long time so i will replace those with rotors, Iridium Denso plugs ? and a fuel filter.

361542-thumb_IMG_1174_1024.jpg (0 Bytes, 200 downloads)