Vorheriges Thema
Nächstes Thema
Thema drucken
Thema bewerten
#11788 07.09.2002 02:43
Registriert seit: Sep 2002
Beiträge: 3
OP Offline
Registriert seit: Sep 2002
Beiträge: 3
Im wondering what all the differences are between the 3.6 (3.8?) and the 4.2L V8. Or if you were able to find a 4.2 from a 94 V8 is it interchangeable without any major modifications?

If you feel your still in control, Your obviously not driving fast enough... 91 V8Q
Registriert seit: Sep 2002
Beiträge: 11
Registriert seit: Sep 2002
Beiträge: 11

It fits but I don't think the tranny can take the increased torque. If you use it, that is =).

I assume you are referring to an automatic. An engine from a car with an automatic will not fit a manual and vice versa.

A car with a PT engine (3,6) has a tranny marked AKD, ATU or AYU and a car with an ABH engine (4,2) a tranny marked AZG.

I would advise you to check the max allowed torque for each tranny with an Audi-dealer or directly with ZF in Germany who made them before you change the engine.

You will have to replace the ECM as well, of course.

Moderiert von  Manfred H., Manfred M., Thorsten D 

Link in Zwischenablage kopiert
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201025)
Responsive Width:

PHP: 7.4.28 Page Time: 0.044s Queries: 19 (0.041s) Memory: 0.5789 MB (Peak: 0.6259 MB) Data Comp: Off Server Time: 2024-07-25 06:22:50 UTC
Valid HTML 5 and Valid CSS