What differences between ZH-HP24A AYU and AZG?

I have on my V8 3.6 1989 AYU, i want put AZG. Can I do?

Thank you everyone

Watch attachment... it should work, but maybe you should change the TCU too.

On my gearbox I read this code only :1043 401 881 F2 .

Can you help me to find correct model?

Thank you again.

This is just the casting-number of the aluminium-housing.

The possible places for the badge are shown in the attachment.

What's the number of the torque converter?

I found it !! But no AYU but AKD n. 1043 040 019.

My problem initially in departure vibrated, suddenly does not move. Back it works well. I found the oil bright

On the torque write 138 002

Thanks

Better, I was wondering about 1989 and AYU

If you really want to replace the AKD with the AZG you need to replace the front axels as well! AKD = Rzeppa homokinetic joint with 108mm flange, AZG = Tripode homokinetic joint with 100mm flange, the optical difference you will see from far away, Rzeppa's are "open" so you can look directly to the bearing balls, the Tripode's are closed (very nice because it's easier to handle without getting dirty hands )