Das kann aber auch andere Fehlerquellen haben wenn die Lampda nicht regelt!
Oxygen Sensor Signal (voltage) is not changing up and down,
Signal shorted to ground or to +12V,
Fuse #5 blown, O2 Sensor heating element not working,
Ground problem between ECU pin 10 and engine block,
fuel pressure too low or too high, intake or exhaust system leak, defective ignition system component,
intake air leak after air mass sensor, O2 sensor is faulty
Overly rich exhaust, Spark Plug fouling,
Is english aber man weiß worum es geht!
