Vorheriges Thema
Nächstes Thema
Thema drucken
Thema bewerten
#247966 25.04.2010 03:26
Registriert seit: Apr 2010
Beiträge: 2
stranger
stranger
Offline
Registriert seit: Apr 2010
Beiträge: 2
Hello van anybody help me my clutch pedal (manuel gearbox) stays on the floor and won't come up anymore !!!
So now I can't drive the car anymore.

It's a 4.2 V8 quatro

Zuletzt bearbeitet von steve B; 25.04.2010 03:50.
Registriert seit: Aug 2002
Beiträge: 13,286
Likes: 2
Carpal \'Tunnel
Carpal \'Tunnel
Registriert seit: Aug 2002
Beiträge: 13,286
Likes: 2
Hej Steve,

check your master/slave zylinders of the clutch.

Bastian

Registriert seit: Apr 2010
Beiträge: 2
stranger
stranger
Offline
Registriert seit: Apr 2010
Beiträge: 2
thank you for your reply, if the master slave zylinder is broken ( I think it is ) is this easy to repair !
I have seen them on ebay for about 150 euro for both, so that is o.k.

steve

Registriert seit: Aug 2002
Beiträge: 13,286
Likes: 2
Carpal \'Tunnel
Carpal \'Tunnel
Registriert seit: Aug 2002
Beiträge: 13,286
Likes: 2
Hi,

there are two cylinders: The master, and the slave cylinder. The first one is up at your pedal, the other one is down at the clutch. One of both could be broken - the symptom fits.

But as important as a new cylinder is the correct venting of the clutch afterwards. That may require your Audi dealer as he has the required venting machine. Manual venting often causes troubles!

Bastian

Registriert seit: Aug 2003
Beiträge: 2,009
Likes: 3
Pooh-Bah
Pooh-Bah
Registriert seit: Aug 2003
Beiträge: 2,009
Likes: 3
Hi Steve,
it is recommended to change master and slave cylinder simultaneously. And as Bastian said: Bleeding procedure has to be executed carefully.
And last but not least: The pair of cylinders is available much cheaper than 150€.


Beste Grüße
Tim
Tim A. #247971 03.05.2010 09:14
Registriert seit: Aug 2002
Beiträge: 13,286
Likes: 2
Carpal \'Tunnel
Carpal \'Tunnel
Registriert seit: Aug 2002
Beiträge: 13,286
Likes: 2
Hi,

I strongly suggest to stay with Audi original parts here. You probably remember my breakdown due to a reproducted, cheaper master cylinder back in 2008. It lasted for not more than 60tkm before it was broken again.

Bastian

Registriert seit: Aug 2003
Beiträge: 2,009
Likes: 3
Pooh-Bah
Pooh-Bah
Registriert seit: Aug 2003
Beiträge: 2,009
Likes: 3
Hi Bastian,
(how funny, to communicate in English),
of course, I remember. But there are quite a lot of differences between the quality of suppliers respectively their parts. I know some very confident part dealers. They deliver high quality spare parts for favourable prices. These parts are quite cheap but not jerry-built. But [censored] happens, and the sudden end of your clutch cylinder might simply also have been bad luck.
There are repair-kits for cylinders available as well. This is the cheapest and very often a successful solution.


Beste Grüße
Tim

Moderiert von  Manfred H., Manfred M., Thorsten D 

Link in Zwischenablage kopiert
Powered by UBB.threads™ PHP Forum Software 8.0.1