|
Registriert seit: Oct 2008
Beiträge: 203
enthusiast
|
enthusiast
Registriert seit: Oct 2008
Beiträge: 203 |
To open the hood
1) Jack up the car in front 2) Unscrew the engine cover under the oil pan 3) Unscrew the three Phillips screws from the upper grille with a long screwdriver between radiator and engine block from below 4) the bottom three screws are covered with a sheet, drill a hole in each case according to each screw 5) through the drilled holes unscrew the screws with a long screwdriver 6) Remove grille now 7) Press the Locks sideways - the hood jump high - the hood is opened again!
Mit freundlichen Grüßen
Benny H Dänemark
|
|
|
Link in Zwischenablage kopiert