|
|
Registriert seit: Jul 2003
Beiträge: 26
|
|
Registriert seit: Jul 2003
Beiträge: 26 |
Hi !
Anyone that knows if it is possible to take oilsump away from the automatic gearbox , with the exhaust crossover pipe in place. The cat´s is dismantled.
Looks like to be little tricky but it also seems to be difficult to loosen the old bolts on the crossover pipe.
Bengt
|
|
|
|
|
Registriert seit: May 2006
Beiträge: 4
stranger
|
|
stranger
Registriert seit: May 2006
Beiträge: 4 |
I don´t think thats a good ideá. I´ts quite tight even whitout the crossoverpipes in place..
Audi V8 3.6L -91
Audi 90 2.3L 20V -90
Audi 90 2.2L -86
|
|
|
|
|
Registriert seit: Jul 2003
Beiträge: 26
|
|
Registriert seit: Jul 2003
Beiträge: 26 |
Hi !
You was quite right !
Had to take crosover pipes down to.
Not so fun . Someone has changed bolts and nuts between downpipes and crosover pipes . Hardened long bolts and nuts .
To hard to drill out so I had to grind the nuts of on one side with a tiny grindingmashine and then split the nut.
Bengt
|
|
|
Link in Zwischenablage kopiert
